시효 열화시킨 터빈 로터강의 피로강도에 관한 연구

서창민, 허정훈, 이해무 et al. · 1996

The estimation of the remaining life for the aged components in power plant as well as chemical and petroleum plants has been recently concerned. The raw materials used in this study are the 1Cr-1Mo-0.25V rotor steel which intensified P and S compositions along with the nominal compositions of ASTM A470 standard. Five kinds of specimens with the different degradation levels were prepared by isothermal aging heat treatment at 630℃. The mechanical properties and fatigue strength of virgin and aged 1Cr-1Mo-0.25V rotor steel have been investigated through the hardness, tensile, fatigue test, SEM fractograph and EDS analysis at room temperature. Thus, the data of aged specimens were compared with those of virgin specimen to evaluate the aging effects. The main results obtained in this study are as follows; The decrease of the hardness due to degradation was distinguished until 50,000hrs simulated service time. And it was confirmed that the considerable amount of P, Mn, Cr and S was precipitated at the grain boundary of aged material through the SEM and EDS analysis. The fatigue strength of 25,000, 50,000, 75,000 and 100,000hrs aged material was decreased 29.5%, 24.4%, 28.6%, 35.7% than that of virgin material at 10 7 cycles of room temperature. The major cracks of virgin and aged materials initiated at the inclusions including Si, P and Mn compositions which were located at the outer periphery of the specimen.

Cited by 1 works.

Authors