금속지지체형 고체산화물 연료전지의 단전지 특성 및 전산해석
이창보, 배중면 · 2007
Newly structured metal-supported solid oxide fuel cell was fabricated and characterized by impedance analysis and galvanodynamic experiment. Using a cermet adhesive, thin ceramic layer composed of anode(Ni/YSZ) and electrolyte(YSZ) was joined with STS430 metal support of which flow channel was fabricated. La 0.8 Sr 0.2 Co 0.4 Mn 0.6 O₃ perovskite oxide was used as cathode material. Single cell performance was increased and saturated at operating time to 300hours at 800℃ because of cathode sintering effect. The sintering effect was reinvestigated by half cell test and exchange current density was measured as 0.005A/㎠. Maximum power density of the cell was 0.09W/㎠ at 800℃. Numerical analysis was carried out to classify main factors influencing the single cell performances. Compared to experimental Ⅳ curve, simulated curve based on experimental parameters such as exchange current density was in good agreement.
Cited by 0 works.