Numerical Impact of Using Different $E$ –$J$ Relationships for 3-D Simulations of AC Losses in MgB2Superconducting Wires
Guillaume Escamez, Frédéric Sirois, Arnaud Badel et al. · IEEE Transactions on Magnetics · 2015
AC losses in superconductors are generated every time a time-varying current/field is present. Engineers must be able to predict these losses as accurately as possible during the design phase of power applications. The electrodynamics of superconductors can be formulated as a nonlinear eddy current problem in which the resistivity of the superconducting region is a highly nonlinear function of the current density. In 3-D finite-element simulations, it leads to time-consuming simulations and convergence issues. In this paper, we compare two different E-J constitutive equations, namely: 1) power law model and 2) the percolation model (PM), programmed within both the H-φ and T-φ formulations. Based on the 3-D case of a three-filament twisted superconducting wire, the numerical performance of all these formulations/material models is compared in terms of accuracy, computation times, number of time steps, and number of Newton iterations for different relaxation methods. It is shown that the combination of the T-φ formulation and the E-J PM works fine and should be further developed, as it seems to constitute the best modeling option from both a numerical and physical point of view.
Cited by 11 works. doi:10.1109/tmag.2015.2480960
Authors
References
- Magnetization of High-Field Superconductors
- Development of an edge-element model for AC loss computation of high-temperature superconductors
- Current-voltage characteristics near the glass-liquid transition in high-Tc superconductors
- The Newton-Raphson method accelerated by using a line search - comparison between energy functional and residual minimization
- Development of superconducting links for the Large Hadron Collider machine
- Properties of YBCO films at high current densities: fault current limiter implications
- Finite-Element Method Modeling of Superconductors: From 2-D to 3-D
- Development of a three-dimensional finite-element model for high-temperature superconductors based on the H-formulation
- Comparison of three eddy current formulations for superconductor hysteresis loss modelling
- AnH-formulation-based three-dimensional hysteresis loss modelling tool in a simulation including time varying applied field and transport current: the fundamental problem and its solution