반복하중을 받는 강섬유 보강 합성보의 비탄성 거동

오영훈, 남영길 · 한국콘크리트학회 2007년도 가을 학술발표회 논문집 · 2007

본 연구는 강섬유 보강 콘크리트와 앵글을 사용한 합성보의 비탄성 거동을 규명하고자 보-기둥 실험체를 제작하여 반복가력에 의한 접합부 실험연구를 수행하였다. 보의 전단보강 상세와 인장보강근비를 변수로 하여 총 5개의 실험체를 제작하였으며, 실험결과로부터 강섬유 보강 합성보의 강도, 연성능력 등의 구조성능을 평가하였다. 실험결과 모든 실험체는 일반적으로 부재각 0.6%에서 실험체의 항복이 발생하였으며, 항복 이후 파괴시까지 강도는 다소 증가하는 형태의 거동을 보여주었다. 변위연성비는 각 실험체의 전단보강상세에 의한 차이를 보였지만, 모두 5.0 이상의 연성적인 거동을 보여주었다. 최종 파괴시 실험체의 최대 변위는 부재각 3.6 ~ 5.1%에서 나타나고 있다. 한편, 실험체의 최종파괴는 보-기둥 접합면에서 발생하고 있으므로, 이러한 파괴를 방지할 수 있는 접합부의 설계 및 접합상세가 필요하다고 판단된다.In this study, five beam-column connection specimens are constructed and tested to evaluate the inelastic behavior. these specimens are composed of steel angles and steel fiber reinforced concrete, which variables are beam's longitudinal reinforcement ratio and shear reinforcement details. The yielding of the specimens were occurred at the 0.6% of drift ratio. And the lateral force resisting capacity are maintained without strength eterioration. However, final failure is caused by the fracture of joint plate in the pannel zone.

Cited by 0 works.

Authors