Paste 박막 건조과정에 대한 연구
양시영 · 대한기계학회 춘추학술대회 · 2005
The ability to predict the drying behavior of thin film and coating is one of the great importance things to the electronic products industry. The drying of volatile solvents from a printed film is a complicated process since it involves simultaneous heat and mass transfer controlled by complex transport and thermodynamic behavior of paste solutions. In conventional drying process, a continuous layer of paste solution is deposited onto a permeable substrate of ceramic coating, which is dried in a furnace with forced air convection. High velocity impinging air jets are commonly used to accelerate the evaporative paste drying process, due to the high heat and mass transfer rate in which are developed in the impingement region. In this work, test system was developed to measure the total residual solvent level. Also, a model was developed to describe the drying behavior of multi-component paste solutions deposited on the permeable substrate. The predictions from the models provide detailed information about the relative importance of internal and external resistances to drying, effect of operating conditions, effect of multi-zone approach, as well as sensitivity of all physical properties on the drying rate. The validity of the model was confirmed by comparing predictions with the drying data available in the literature and the collected in our experiments. The experimental data and the simulation results are in good agreement.
Cited by 0 works.