Интенсификация процесса увлажнения зерна перед помолом в шнековом увлажнителе

Бузоверов Сергей Юрьевич, Лобанов Владимир Иванович, Протасов Николай Сергеевич · Vestnik Altajskogo gosudarstvennogo agrarnogo universiteta · 2014

The research goal was to study the effect of wheat tempering in tempering screw on flour-extraction ratio and the main flour quality indices. The research was conducted in the mill of the ZAO “Tabunskiy Elevator” of the Tabunskiy District, Altai Region, and specialized laboratory “Processes and Equipment” of the Chair of Agricultural Product Processing Mechanization of the Altai State Agricultural University. The main research objective was to reveal the effect of wheat grain moisture level before First Break system on flour-extraction and the main flour quality indices. It is experimentally proved that the most optimum grain moisture level of First Break system is 17.0% as that moisture level enables obtaining the following most optimum quantity and quality indices of the finished product: moisture content of the premium grade flour 15%, that of the first grade flour 14.8%, and that of semolina 15.4%; the amount of premium grade flour made 20.5%, that of semolina 4%, and the total flour-extraction ratio made 75.5%. It is concluded that upward or downward deviation of grain moisture level at First Break system may decrease the efficiency of wheat grain processing. The conducted experimental research to reveal the effect of moisture level on the internal friction angle at the tempering screw indicate the optimum moisture level at the maximum through-put prior to First Break system as much as ω = 15%. In that case the internal friction angle made φ = 37.4o. Therefore, we propose in further calculations to be guided by the optimum internal friction angle φ = 37o at ω = 15%.

Cited by 0 works.

Authors