Некоторые закономерности измельчения фуражного зерна при помощи удара лезвием
Сабиев Уахит Калижанович, Пирожков Дмитрий Николаевич, Сабиев Ильяс Уахитович · Vestnik Altajskogo gosudarstvennogo agrarnogo universiteta · 2014
The paper describes a new concept of “impact to the kernel by blade” during grinding feeder grain. The destruction model of the kernel using impact by blade was presented. It is assumed that one of the ways of eliminating the non-uniformity of particle size distribution of the finished product is differentiated grinding with the use of so-called pinched impact by blade to the kernel. Grinding scheme is proposed when the process is carried out in two or three stages. Moreover, unlike existing schemes multistage grinding, it is proposed to combine breakers and cutting units on the grinder disks. Using of breakers into the scheme of grinding will ensure efficient grinding of kernels with micro cracks and clad damages which were obtained during harvest and post-harvest handling of grain. Cutting units will provide grinding of rugged kernels. Crack appears due to the notch which is the stress raiser and performed by simultaneous impacts by blades to the kernel with both sides. It grows with the speed greater than the speed of blade moving (penetration). It leads to brittle fracture of the kernel. Notches initiate the process of brittle fracture, which leads to the reduction of energy consumption for grinding process. In addition, the fractured (grinded) parts of kernels represent fragments with equal particle size distribution, and the amount of pulverulent fraction is reduced to zootechnical requirements. The theory of Griffith was used for a theoretical description of the destruction process of kernel. Expressions for determining the energy balance, specific work per unit length of growing cracks are obtained, also all components included in specified expressions reviewed. The results of experimental studies of grain-crops grinding by the offered grinder presented. Experimental data confirm the theoretical assumptions about the increase in the uniformity of particle size distribution of the finished product and the reduction of energy intensity by an average of 10 15%.
Cited by 0 works.