과산화수소 주입을 통한 로켓 추력편향제어
이은광, 강홍재, 정상우 et al. · 2016
Liquid injection thrust vector control, one of thrust vectoring mechanism, can rapidly provide side thrust through just valve opening and its system is simple. Generally, nitrogen tetroxide or Freon 114-B2 have been used as injectants, however, they are highly corrosive or have low side specific impulse. In this paper, the liquid injection thrust vector control using hydrogen peroxide which has better storability and higher performance compared to conventional injectants was demonstrated. Based on a performance prediction and paper survey, the system and test conditions were designed. Thrust vectoring effect was observed through the hot-fire test. However, due to the small expansion ratio of the nozzle and the small pressure force acting area, the pressure increase induced by the liquid injection was not sufficiently converted to the side force. Therefore, it resulted in the large difference between the predicted side force and the measured side force.
Cited by 0 works.