형광체막 성형을 위한 스퀴징 공정변수에 관한 연구
박정연, 이정원, 윤길상 · 금형가공 심포지엄 · 2014
In case of coating the phosphor slurry in the elastic mold cavity with squeezing method, it was observed the pressure distribution in phosphor slurry varying the main squeezing parameter (squeeze angle, squeezing speed, viscosity of phosphor slurry) by applying the flow simulation. In addition, it is confirmed that the larger slurry viscosity, the faster squeezing speed, and the smaller squeeze angle, the phosphor slurry is filled in the cavity of the elastic mold through the comparison of the squeezing experiment and flow simulation results. It is determined that the best slurry filling condition is squeeze angle=30~45deg, squeeze speed=40~70mm/s, viscosity of phosphor slurry=6,500cps(50wt% of phosphor concentration).
Cited by 0 works.