Особенности работы насоса на доильных установках

Шахов Владимир Александрович, Урбан Владимир Александрович, Козловцев Андрей Петрович et al. · Известия Оренбургского государственного аграрного университета · 2016

It is pointed out that the НМУ-6 milk pumps of serial production, because of a number of design and manufacturing drawbacks, do not provide stable performance in operations with a vacuum milk line and on the whole they are inferior to foreign ones in the totality of features. In order to improve the pressure characteristics for the НМУ-6 milk pump, a semi-open impeller has been developed. The analytical, experimental and evaluation-constructive methods were used in the study. The experimental studies were carried out in the laboratory of the Department of Mechanization of Technological Processes of the Orenburg State Agrarian University in 2014-2015. The impeller, having optimum characteristics, is constructed as follows: a circle with the radius of 32.5 mm, the center of which is the axis of the impeller, is made. The centers of one more circle (with the radius of 56.5 mm), on which the blades are delineated, are located on the above circumference. These centers are shifted relative to the centre of the impeller. Any deviation of the circle radius is followed by changing of the blade location and pump characteristics. In the process of the experimental impeller testing the following data were obtained: the milk production in tests with the vacuum milk line (51 kPa), the pressure in the line being 1.2 kgf/cm2, was 5 m3/h, while milk production when pumped at atmospheric pressure was 14 m3/h. The pressure characteristics of the pump with the experimental impeller, with different vacuum values, are submitted. The processing of data of the multifactor experiment made it possible to reveal the optimum design and operating parameters of the device, the values of which were used in the design and adjustment of the production model for comparative tests. The production experiment demonstrated that the described variant of the centrifugal milk pump, had significant advantages over the serial НМУ-6 pump. The performance of the experimental centrifugal milk pump is within 4921 l/h, whereas that of the serial one is 3429 l/hour. The results of laboratory tests suggest that the experimental centrifugal milk pump with a semi-open impeller ensures the stability of the milking system operation.

Cited by 0 works.

Authors