Повышение эффективности технологии врезного шлифования по жесткой схеме

Игорь Александрович Рябенков, Володимир Олександрович Анділахай · Вестник Приазовского государственного технического университета. Серия: Технические науки · 2015

Theoretical bases of grinding technology researches results form the basis of this work. It has been shown that grinding efficiency increase can be achieved through the use of new kinematic grinding schemes and progressive designs of abrasive tools. However, not enough attention is paid to the calculation of the main technological machining parameters with due regard to separate processes of cutting and friction at grinding, thus restricting the effective application of these kinematic grinding schemes and scientifically grounded selection of optimal processing conditions. In this paper a mathematical model has been developed for determining the material removal rate and cutting force at plunge grinding, what made it possible to substantiate reducing the power strength at grinding and to increase productivity. Calculations revealed that the cutting force at plunge grinding is conditioned by the disk bond friction against the material being processed, the intensity of which in the course of processing time increases proportionally due to an increase of elastic movements in the technological system. Proceeding from these results the optimum grinding conditions based on the use of the abrasive disk that works under self-sharpening conditions, thus eliminating the disk bond friction against the material being processed, have been grounded. In this case, the abrasive disk provides complete removal of the processed material supplied to the cutting zone at the nominal speed of a workpiece movement. Also the ability to reduce cutting forces through the increase of the disk speed and the workpiece speed ratio has been shown.

Cited by 0 works.

Authors