Упругие свойства керамики на основе нитрида кремния
Лукьянова Ольга Александровна, Федоров Виктор Александрович, Новиков Всеслав Юрьевич et al. · Tambov University Reports Series Natural and Technical Sciences · 2016
The influence and regularities of the magnesium, yttria and alumina oxide additives on the example of compositions such as Al2O3-Y2O3 and Al2O3-MgO on the elastic properties of the ceramic material based on silicon nitride obtained by free sintering in nitrogen and by spark plasma sintering were investigated. In particular based on the example of silicon nitride ceramics produced by free sintering at 1650 °C with the addition of 9 wt. % of Al2O3, and 6 wt. % of Y2O3, and obtained by free sintering at 1800 °C with the addition of 6 wt. Al2O3oxides and 2 wt. % MgO has been shown that the produced ceramics exhibit a close value of Young’s modulus in a narrow range 248-250 GPa. At the same time it was found that materials based on silicon nitride obtained spark plasma sintering at temperatures of 1550 °C and 1650 °C with the same composition of addition of Al2O3-Y2O3 and Al2O3-MgO oxides have higher rates of Young’s modulus in the range 280-300 GPa. The experimental curves of load-unload of the indenter of the materials based on silicon nitride with the addition of oxides systems such as Al2O3-Y2O3 and Al2O3-MgO obtained by spark plasma sintering have also been shown.
Cited by 0 works.