Особенности определения модуля упругости сверхориентированных высокопрочных пленочных нитей, полученных вытяжкой ксерогелей сверхвысокомолекулярного полиэтилена

Ю.М. Бойко, В.А. Марихин, О.А. Москалюк et al. · Physics of the Solid State · 2018

AbstractThe influence of the gauge length l _0 of a sample on the modulus E of ultraoriented film filaments of ultra-high-molecular-weight polyethylene (UHMWPE) has been elucidated. The filament samples are obtained by a multistage orientation drawing on a contact heater with achieving extremely high draw ratios as large as λ = 120. Precursors were xerogels prepared by the drying of 1.5% UHMWPE gel solutions in decalin. A noticeable gain in “methodical” quantity E from 100 to 230 GPa at l _0 increasing from 10 to 80 mm with a damping behavior has been established. The E ( l _0) dependence is shown to be described via the empirical equation that allows the E value to be predicted as a function of l _0. According to the prediction, a saturation of the true value E with a yield to a plateau at E = 242 GPa occurs at l _0 = 200 mm.

Cited by 1 works. doi:10.21883/ftt.2019.01.46911.207 Open-access PDF

Authors

References