제강공정에서 발생하는 환원슬래그의 환경유해성 평가
윤철우, 엄남일, 전태완 et al. · 2019
In this study, an environmental hazardous impact assessment for the ladle furnace slag generated in the steelmaking process was conducted. The purpose of this study was to examine the possibility of expanding the recycling opportunities for ladle furnace slag. First, the physical and chemical properties were reviewed, and it was found that CaO accounted for more than 50% of the slag. Therefore, it was deemed necessary to assess the health hazards associated with the recycling of the slag. Because CaO is highly alkaline, inhalation and eye contact are a concern for workers during the manufacturing, storage, and transportation of the accelerator product. To avoid this, workers should wear personal safety gear and prevent damage. Applying an environmental hazardous impact assessment for non-media contact, no item exceeded the standards for heavy metal content in cement replacement material following recycling. Because the content criteria are defined for only five elements (As, Cd, Cu, Pb, and Hg), it is believed that using ladle furnace slag as a cement substitute will not contravene the Waste Control Act. The results for fluoride were close to the criteria for the warren level of soil contentment prescribed under the Soil Environment Conservation Act. Therefore, the environmental impact of using ladle furnace slag as an alternative material for accelerator products was considered to be minimal. However, it is necessary to ensure safety via continuous environmental monitoring when it is used in accelerator products. After conducting an environmental hazardous impact assessment for media contact, it was deemed necessary to review the aging process of ladle furnace slag. The slag may be used for recycling after aging in accordance with the “Guidelines for the Recycling of Steel Slag and Coal Ash for Emission Operators.”
Cited by 0 works.