A Modified Model Predictive Torque Control with Parameters Robustness Improvement for PMSM of Electric Vehicles
Siyu Gao, Yanjun Wei, Di Zhang et al. · Actuators · 2021
Model predictive torque control with duty cycle control (MPTC-DCC) is widely used in motor drive systems because of its low torque ripple and good steady-state performance. However, the selection of the optimal voltage vector and the calculation of the duration are extremely dependent on the accuracy of the motor parameters. In view of this situation, A modified MPTC-DCC is proposed in this paper. According to the variation of error between the measured value and the predicted value, the motor parameters are calculated in real-time. Meanwhile, Model reference adaptive control (MRAC) is adopted in the speed loop to eliminate the disturbance caused by the ripple of real-time update parameters, through which the disturbance caused by parameter mismatch is suppressed effectively. The simulation and experiment are carried out on MATLAB / Simulink software and dSPACE experimental platform, which corroborate the principle analysis and the correctness of the method.
Cited by 13 works. doi:10.3390/act10060132
Authors
References
- FOC and DTC: two viable schemes for induction motors torque control
- Research on the Performances and Parameters of Interior PMSM Used for Electric Vehicles
- Model Predictive Current Control for PMSM Drives With Parameter Robustness Improvement
- Performance Improvement of Model-Predictive Current Control of Permanent Magnet Synchronous Motor Drives
- Generalized Two-Vector-Based Model-Predictive Torque Control of Induction Motor Drives
- Robustness Improvement of Predictive Current Control Using Prediction Error Correction for Permanent-Magnet Synchronous Machines
- Effects of Rotor Position Error in the Performance of Field Oriented Controlled PMSM Drives for Electric Vehicle Traction Applications
- Sliding-Mode Observer-Based Mechanical Parameter Estimation for Permanent Magnet Synchronous Motor
- Torque Ripple Reduction of Predictive Torque Control for PMSM Drives With Parameter Mismatch
- Model-Predictive Control of Induction Motor Drives: Torque Control Versus Flux Control