Model-Free Parallel Predictive Torque Control Based on Ultra-Local Model of Permanent Magnet Synchronous Machine
Manping Lv, Siyu Gao, Yanjun Wei et al. · Actuators · 2022
The finite control set model predictive torque control (FCS-MPTC) selects the optimal voltage vector (VV) by the composite cost function composed of torque and flux error, which makes it have a faster dynamic response than conventional control methods. However, the prediction state error caused by machine parameter mismatch and the difficulty in setting the weight factor in the composite cost function seriously restrict the popularization and application of FCS-MPTC. In this paper, a model-free parallel predictive torque control (MF-PPTC) based on an ultra-local (UL) model is proposed to solve above problems. The UL model replaces the machine mathematical model without any machine parameters and only uses the input and output of the system, which greatly improves the robustness of the control system. The nonlinear extended state observer proposed for the unknown part of the system has fast convergence and improves the dynamic performance of the system. In addition, the conventional parallel predictive control structure is optimized to reduce the dynamic adjustment process during the selection of optimal voltage vector. Simulation and experimental comparison between the conventional PPTC and the proposed MF-PPTC verified the superiority of the proposed method.
Cited by 13 works. doi:10.3390/act11020031 Open-access PDF
Authors
References
- Analysis of direct torque control in permanent magnet synchronous motor drives
- Modeling, simulation, and analysis of permanent-magnet motor drives. I. The permanent-magnet synchronous motor drive
- FOC and DTC: two viable schemes for induction motors torque control
- Model-free control
- Model-Free Predictive Current Control for Interior Permanent-Magnet Synchronous Motor Drives Based on Current Difference Detection Technique
- Model Predictive Direct Torque Control With Finite Control Set for PMSM Drive Systems, Part 1: Maximum Torque Per Ampere Operation
- Finite-Control-Set Model Predictive Torque Control With a Deadbeat Solution for PMSM Drives
- Adaptive Speed Control of PMSM Drive System Based a New Sliding-Mode Reaching Law
- Improved Deadbeat Predictive Current Control Combined Sliding Mode Strategy for PMSM Drive System
- Online Parameter Estimation Technique for Adaptive Control Applications of Interior PM Synchronous Motor Drives