Измерение температуры жидких сред при ударном сжатии
М. А. Гулевич, В. В. Пай, Яковлев Игорь Валентинович et al. · IZVESTIA VOLGOGRAD STATE TECHNICAL UNIVERSITY · 2014
This work is concerned with measuring the temperature liquid environments under their impact loading. The temperature sensor was a battery of three-layer (copper-constantan-copper) planar thermocouples disposed in the shock-compressed investigated environment. At the process of convective heat exchange between the loaded environment and the sensor during 0,5…1,5 ms there is an alignment temperature of hot junctions of thermocouples and the environment. Dependence on the time arising from such heating voltage at the thermopile, recorded by pulsed oscillators. Voltage thermopile arising at such heating depending on the time recorded by pulse oscilloscope. The measured voltage is determined by the maximum value of temperature of the medium. Testing of this method is carried out by measurements of the water temperature under the shock-wave loading up to a pressure of 6,7 GPa. The measured value of the temperature jump was equal to 340±400 C in agreement with the theoretically predicted value. Conducted a series of experiments on measuring temperature in the matrix of the emulsion explosive at pressure up to 9 GPa. Good agreement experimental data and calculations is showed.
Cited by 0 works.