Неравновесные состояния в ВТСП-композитах второго поколения при сверхкритических импульсных токовых воздействиях
И. В. Анищенко, Покровский Сергей Владимирович, М.А. Осипов et al. · Письма в журнал технической физики · 2021
This paper presents the results of studying the processes of еру HTS composites switching from the superconducting to the resistive state at microsecond current pulses. Two modes of pulsed current load were used: with an amplitude of ~ 1.1 Ic (the so-called "soft" mode) and with an amplitude of ~ 3 Ic ("hard" mode). The possibility of passing supercritical currents through the tape without superconductor characteristics degradation is shown. To explain the processes occurring in the tape during the current pulse, 2D FEA (finite element analyzes) was developed, with the help of which the dynamic resistance of the HTS composite superconducting layer was calculated in the "hard" load mode and nonstationary processes of current redistribution between the different tape layers were demonstrated.
Cited by 0 works. doi:10.21883/pjtf.2021.19.51508.18828 Open-access PDF
Authors
References
- Development and production of second generation high T c superconducting tapes at SuperOx and first tests of model cables
- Towards Faster FEM Simulation of Thin Film Superconductors: A Multiscale Approach
- Analytical and Experimental Studies on the Hybrid Fault Current Limiter Employing Asymmetric Non-Inductive Coil and Fast Switch
- Analysis on hysteresis in nucleate pool boiling heat transfer
- A preliminary study of mechanical switch using high temperature superconducting material
- Characterization of the Superconducting to Normal Transition of HTS Coated Conductors by Fast Pulsed Current Measurements
- Temperature dependence of filament-coupling in Bi-2223 tapes: magneto-optical study
- Overcritical Current Resistivity of YBCO-Coated Conductors Through Combination of PCM and Finite-Element Analysis
- Heat Propagation Velocities in Coated Conductors for Fault Current Limiter Applications
- Current Bypassing Properties by Thermal Switch for PCS Application on NMR/MRI HTS Magnets