Экспериментально-аналитические исследования пожарной опасности материалов, применяемых в оборудовании с обогащенными кислородом средамипри повышенных давлениях, и пути снижения их горючести
И. А. Болодьян, Леонид Петрович Вогман, D. А. Korolchenko · Pozharovzryvobezopasnost/Fire and Explosion Safety · 2023
Introductio n. Sealed equipment (hereinafter referred to as hermetic chambers) is used in various branches of economy. Atmospheres enriched with oxygen (in some cases under variable pressure conditions) are used. It was shown that the main reason of the fires in the pressurized chambers was the unregulated use of the electrical equipment, as well as combustible substances and materials on the basis of organic compounds included in the materials used in the pressurized chambers. Objective. To find ways to decrease combustibility of materials used in pressurized chambers and to study fire risk parameters of pressurized chambers with high oxygen content and increased pressure. Obje ctives. To determine the boundary conditions of applying materials with increased values of temperature, oxygen content and pressure and analyze the results of experimental studies of combustibility of materials used in sealed chambers. Research met hods. Investigation of the characteristics of the combustion process of non-metallic materials under increased pressure was carried out on an original setup represented by a stainless steel vessel with a height of 750 mm and an inner diameter of 155 mm. A spiral of nichrome wire was used to ignite the sample. The pressure was fixed with a manometer. Results and th eir discussion. As a result of experimental research of fire hazard of construction and construction materials in oxygen-enriched media and under increased pressure the ways of increasing the oxygen concentration limit (OCL) and reduction of combustibility of materials were determined: application of heat-removing surface, incombustible shell; putting inhibitors in their composition and structure; surface treatment with different fire protective compositions and impregnations. When studying the parameters of fire hazard (flame propagation velocity, heat of combustion, autoignition temperature) of materials under the conditions of changes in the composition of nitrogen-oxygen atmosphere and pressure, it was found that the OCL for all materials decreases at higher pressures. Conc lusions. It is found that the limiting oxygen concentration depends on the geometrical dimensions of the sample, as well as on the speed of the gas flow. At higher pressures the OCL for all the materials decreases. The presence of a heat-removing surface also leads to higher OCL, which increases with increasing substrate thickness and decreasing thickness of the material on it. For materials not containing substances that inhibit the combustion reaction, a decrease in the LOC value with an increase in the number of hydrogen atoms in the polymer macromolecule is characteristic.
Cited by 1 works. doi:10.22227/0869-7493.2023.32.03.17-30 Open-access PDF
Authors
References
- Spread of a laminar diffusion flame
- Flame retardancy mechanisms of metal phosphinates and metal phosphinates in combination with melamine cyanurate in glass‐fiber reinforced poly(1,4‐butylene terephthalate): the influence of metal cation
- Thermal insulation by heat resistant polymers for solid rocket motor insulation
- FIRE AND HYPERBARIC OXYGEN
- Problem of Fire in Oxygen-rich Surroundings
- Identification of the extinction mechanism of lean limit hydrogen flames based on Lewis number effect
- Multicriteria materials selection for extreme operating conditions based on a multiobjective analysis of irradiation embrittlement and hot cracking prediction models
- Mechanisms of the Action of Fire-Retardants on Reducing the Flammability of Certain Classes of Polymers and Glass-Reinforced Plastics Based on the Study of Their Combustion
- Estimating flammability limits through predicting non-adiabatic laminar flame properties
- Properties of selected structural and flat flexible cabling materials for low temperature applications