Влияние выдува струи из тонкой трубки на генерацию торнадоподобного вихря и интенсификацию развивающегося закрученного турбулентного потока в наклонной канавке на стенке канала
С.А. Исаев, Д. В. Никущенко, Л. С. Яновский et al. · Письма в журнал технической физики · 2023
A numerical study of the effect of blowing a jet from a thin air tube on the vortex motion in an inclined groove on the wall of a plane-parallel channel is performed using StarCCM+ calculation codes. It is shown that in the range of change in the flow rate in the jet from 0 to 0.1% in fractions of the air flow rate in the channel, the blowing of the jet does not affect the self-organized tornado-like vortex in the inlet part of the groove. With an increase in the relative flow rate, the outflowing trickle is gradually drawn in, and, starting from 0.08%, it is completely captured by a helical vortex emerging from the central part of the groove with an inclination angle of 45°. In this case, the swirling flow in the tail part of the groove is intensified due to the resulting pressure drop between the zones of stagnation on the windward slope and rarefaction at the bottom of the groove.
Cited by 0 works. doi:10.21883/pjtf.2023.18.56174.19660 Open-access PDF
Authors
References
- On the accuracy of limiters and convergence to steady state solutions
- On the k-3 stagnation point anomaly
- Implicit Solution of Preconditioned Navier-Stokes Equations Using Algebraic Multigrid
- Abnormal enhancement of separated turbulent air flow and heat transfer in inclined single-row oval-trench dimples at the narrow channel wall
- Simulation of Vortex Heat Transfer Enhancement in the Turbulent Water Flow in the Narrow Plane-Parallel Channel with an Inclined Oval-trench Dimple of Fixed Depth and Spot Area
- Flow structure and heat transfer characteristics of a dimpled wedge channel with a bleed hole in dimple at different orientations and locations
- Genesis of Anomalous Intensification of Separation Flow and Heat Transfer in Inclined Grooves on Structured Surfaces
- The Influence of the Angle of Inclination of Single-Row Oval-Trench Dimples in the Stabilized Hydrodynamic Section of a Narrow Channel on the Anomalous Intensification of the Separated Turbulent Flow
- Analysis of the Anomalous Intensification of a Separate Flow and Heat Transfer in a Stabilized Section of a Narrow Channel with Single-Row, Inclined, Oval-Trench Dimples with the Use of Various Grids and Turbulence Models
- Structure of Separation Flow Past a Cylindrical Cavity in the Wall of a Plane Channel