Microreactors: New Technology for Modern Chemistry

W. Ehrfeld, Volker Hessel, Holger Löwe · 2000

1 State of the Art of Microreaction Technology 1.1 Definition 1.1.1 Microsystems Termed Microreactor 1.1.2 Structural Hierarchy of Microreactors 1.1.3 Functional Classification of Microreactors 1.1.4 Dividing Line Between Analysis and Reaction Systems 1.2 Fundamental Advantages of Microreactors 1.2.1 Fundamental Advantages of Miniaturized Analysis Systems 1.2.2 Fundamental Advantages of Nano-Scale Reactors 1.2.3 Advantages of Microreactors Due to Decrease of Physical Size 1.2.4 Advantages of Microreactors Due to Increase of Number of Units 1.3 Potential Benefits of Microreactors Regarding Applications 1.4 References 2 Modern Microfabrication Techniques for Microreactors 2.1 Microfabrication Techniques Suitable for Microreactor Realization 2.2 Evaluation of Suitability of a Technique 2.3 Anisotropic Wet Etching of Silicon 2.4 Dry Etching of Silicon 2.5 LIGA Process 2.6 Injection Molding 2.7 Wet Chemical Etching of Glass 2.8 Advanced Mechanical Techniques 2.8.1 Surface Cutting with Diamond Tools 2.8.2 Milling, Turning and Drilling 2.8.3 Punching 2.8.4 Embossing 2.9 Isotropic Wet Chemical Etching of Metal Foils 2.10 Electro Discharge Machining (EDM) of Conductive Materials 2.10.1 Wire-Cut Erosion and Die Sinking 2.10.2 -EDM Drilling 2.11 Laser Micromachining 2.12 Interconnection Techniques 2.12.1 Microlamination of Thin Metal Sheets 2.13 Functional Coatings 2.13.1 Functional Coatings for Corrosion Prevention 2.13.2 Functional Coatings for Fouling Prevention 2.14 References 3 Micromixers 3.1 Mixing Principles and Classes of Macroscopic Mixing Equipment 3.2 Mixing Principles and Classes of Miniaturized Mixers 3.3 Potential of Miniaturized Mixers 3.4 Contacting of Two Substreams, e.g. in a Mixing Tee Configuration 3.4.1 Mixing Tee-Type Configuration 3.4.2 Double Mixing Tee-Type Configuration 3.5 Collision of High-Energy Substreams for Spraying/Atomizing 3.5.1 Collision of Three Substreams in a Microjet Reactor 3.6 Injection of Many Small Substreams of One Component into a Main Stream of Another Component 3.6.1 Injection of Multiple Microjets 3.7 Manifold Splitting and Recombination of a Stream Consisting of Two Fluid Lamellae of Both Components 3.7.1 Multiple Flow Splitting and Recombination Combined with Channel Reshaping 3.7.2 Multiple Flow Splitting and Recombination Using Fork-Like Elements 3.7.3 Multiple Flow Splitting and Recombination Using a Separation Plate 3.7.4 Multiple Flow Splitting and Recombination Using a Ramp-Like Channel Architecture 3.8 Injection of Many Substreams of Both Components 3.8.1 Multilamination of Fluid Layers in an Interdigital Channel Configuration 3.8.2 Vertical Multilamination of Fluid Layers Using a V-type Nozzle Array 3.8.3 Multilamination Using a Stack of Platelets with Microchannels 3.8.4 Multilamination Using a Stack of Platelets with Star-Shaped Openings 3.9 Decrease of Diffusion Path Perpendicular to the Flow Direction by Increase of Flow Velocity 3.9.1 Decrease of Layer Thickness by Hydrodynamic Focusing 3.10 Externally Forced Mass Transport, e.g. by Stirring. Ultrasonic Wave, Electrical and Thermal Energy 3.10.1 Dynamic Micromixer Using Magnetic Beads 3.11 References 4 Micro Heat Exchangers 4.1 Micro Heat Exchangers with Wide and Flat Channels 4.1.1 Cross-Flow Heat Exchange in Stacked Plate Devices 4.1.2 Cross-Flow Heat Exchange Based on Cross-Mixing 4.1.3 Counter-Flow Heat Exchange in Stacked Plate Devices 4.1.4 Electrically Heated Stacked Plate Devices 4.2 Micro Heat Exchangers with Narrow and Deep Channels 4.2.1 Heat Exchanger with One-Sided Structured Channels 4.2.2 Heat Exchanger with Double-Sided Structured Channels 4.3 Micro Heat Exchangers with Breakthrough Channels 4.4 Axial Heat Conduction 4.4.1 Numerical Calculations of the Influence of Material on Heat Transfer Efficiency 4.4.2 The Use of Thermal Blocking Structures 4.5 Permanent Generation of Entrance Flow by Fins 4.6 Generation of a Periodic Flow Profile by Sine-Wave Microchannels 4.7 Microtechnology-Based Chemical Heat Pumps 4.8 Performance Characterization of Micro Heat Exchangers 4.8.1 Temperature Profiles of Micro Heat Exchangers Yielded by Thermograms of Infrared Cameras 4.9 References 5 Microseparation Systems and Specific Analytical Modules for Microreactors 5.1 Microextractors 5.1.1 Partially Overlapping Channels 5.1.2 Wedge-Shaped Flow Contactor 5.1.3 Contactor Microchannels Separated by a Micromachined Membrane 5.1.4 Contactor Microchannels Separated by Sieve-Like Walls 5.1.5 Micromixer - Settler Systems 5.2 Microfilters 5.2.1 Isoporous-Sieve Microfilters 5.2.2 Cross-Flow Microfilters 5.3 Gas Purification Microsystems 5.4 Gas Separation Microdevices 5.5 Specific Analytical Modules for Microreactors 5.5.1 Analytical Modules for In-Line IR Spectroscopy 5.5.2 Analytical Module for Fast Gas Chromatography 5.6 References 6 Microsystems for Liquid Phase Reactions 6.1 Types of Liquid Phase Microreactors 6.2 Liquid/Liquid Synthesis of a Vitamin Precursor in a Combined Mixer and Heat Exchanger Device 6.3 Acrylate Polymerization in Micromixers 6.4 Ketone Reduction Using a Grignard Reagent in Micromixers 6.5 Laboratory-Scale Organic Chemistry in Micromixer/Tube Reactors 6.6 Dushman Reaction Using Hydrodynamic Focusing Micromixers and High-Aspect Ratio Heat Exchangers 6.7 Synthesis of Microcrystallites in a Microtechnology-Based Continuous Segmented-Flow Tubular Reactor 6.8 Electrochemical Microreactors 6.8.1 Synthesis of 4-Methoxybenzaldehyde in a Plate-to-Plate Electrode Configuration 6.8.2 Scouting Potentiodynamic Operation of Closed Microcells 6.9 References 7 Microsystems for Gas Phase Reactions 7.1 Catalyst Supply for Microreactors 7.2 Types of Gas Phase Microreactors 7.3 Microchannel Catalyst Structures 7.3.1 Flow Distribution in Microchannel Catalyst Reactors 7.3.2 Partial Oxidation of Propene to Acrolein 7.3.3 Selective Partial Hydrogenation of a Cyclic Triene 7.3.4 H 2 /O 2 Reaction 7.3.5 Selective Partial Hydrogenation of Benzene 7.3.6 Selective Oxidation of 1-Butene to Maleic A

Cited by 617 works.

Authors