Исследование и сравнительная оценка показателей прочности фиксации отломков модели бедренной кости различными типами аппаратов внешней фиксации и накостных пластин
Ямщиков Олег Николаевич, И. А. Норкин, Емельянов Сергей Александрович et al. · Tambov University Reports Series Natural and Technical Sciences · 2014
For the treatment of fractures of the femur use various methods of osteosynthesis: of plate, transosseus, intramedullary. On experience, we estimate the value of strength characteristics fixation stability using different designs for transosseous and plate osteosynthesis: external fixation devices (APS) spoke and stick-type of plate with limited contact area and angular stability. The joint strength was investigated with the model of the lock in an experiment using a load pattern in the transverse and the longitudinal direction of the rotation. The load was given until when the structure consisting of a clamp and the bone model in the form of a rod with round section L = 400 mm, d = 30 mm, lost rigidity. Three series of experiments for each case osteosynthesis are conducted. Analyzing the strength of fixing performance, it is concluded that the design rigidity fixation when exposed to loads in the transverse direction to the longitudinal axis of the model and rotation of a rod-type apparatus above 25-140 % compared to the spoke-type apparatus. In the test pattern with the plates along the axis of the load indicators of the strength of fixing the plate to the corner stability was higher by 37 %, when tested with a load of 90 degrees to the axis of the model is 16 % compared to the limited plate contact area. When comparing the model and the model of apparatus fixed to the plates, there is superiority in strength of the fixation plate over the best angular stability indices stick-type apparatus with a load axis 500 % load and at an angle of 90 degrees at 10 %. Thus, the largest fragments fixation strength achieved using plates with angular stability.
Cited by 0 works.