高レベル放射性廃棄物の固定化に関する研究:Ⅴ 硝酸バリウムと二酸化チタンの反応

博章 田川, 淳一 大橋 · Yokohama National University Repository (Yokohama National University) · 1984

Titanates with a perovskite-type structure are expected as one of recommended materials which are capable of immobilizing high-level radio active waste for a long period. In the present paper, mechanism and kinetics for the reaction of Ba(NO3)2 with TiO2(anatase) were studied by use of thermobalance, DTA and X-ray diffraction methods. Barium is one of fission products with high yield, and TiO2 is used as a matrix for immobilizing the radwaste. According toTG/DTA, the melting point of Ba(NO3)2WaS5750C,Ba(NO3)2 began to be decomposed above the melting point. The reaction of Ba(NO3)2 with TiO2 occurred near 460℃ or at higher temperatures in the solid state. From the conversion vs. time curves at constant temperatures, it was deduced that the reaction obeyed the equation controlled by the phase boundary reaction : kt=1-(1-α)l/3, where k is a reaction rate in min-1, t is time, and α is a conversion ratio of the reaction. The relationship between logarithm of the reaction rate and the reciprocal absolute temperature showed two straight lines, which were discreate at 580℃. This means that the reaction above 580℃ occurs in the solid-liquid state and that below 580℃ proceeds in the solid-solid state. The rate of the former was about a fifth of the value extrapolatlng the latter, but the reaction mechanism was not changed. Both lines gave the same apparent activation energy, 212 kJ moI-1.

Cited by 0 works. Open-access PDF

Authors