ПІДВИЩЕННЯ ПРАЦЕЗДАТНОСТІ ПОРШНЕВИХ КІЛЕЦЬ ДВИГУНІВ ВНУТРІШНЬОГО ЗГОРЯННЯ ШЛЯХОМ МІКРОДУГОВОГО ОКСИДУВАННЯ АЛЮМІНІЄВИХ СПЛАВІВ

Олександр Володимирович Субботін, Валерій Володимирович Білозеров, Валерія Субботіна et al. · The Scientific Issues of Ternopil Volodymyr Hnatiuk National Pedagogical University Series pedagogy · 2026

The paper addresses the актуal scientific and technical problem of improving the performance and durability of piston rings in internal combustion engines. Particular attention is paid to reducing weight and dimensional parameters of components, enhancing fuel efficiency, and decreasing harmful emissions. It is shown that traditional materials such as cast iron and steel, despite their advantages, have several significant drawbacks, including high weight, limited corrosion resistance, manufacturing complexity, and environmental concerns associated with protective coating technologies. The feasibility of using aluminum alloys as an alternative material for piston rings is substantiated. It is established that their application is limited by insufficient wear resistance, low modulus of elasticity, and degradation of mechanical properties at elevated temperatures. To overcome these limitations, the use of micro-arc oxidation (MAO) is proposed, which enables the formation of high-strength ceramic-like oxide coatings on the material surface. The features of the MAO process and the mechanism of coating formation based on aluminum oxide (particularly α-Al₂O₃) are analyzed. These coatings are characterized by high hardness, thermal stability, wear resistance, and a low friction coefficient. It is shown that the formed coatings exhibit strong adhesion to the substrate, controlled porosity, and the ability to retain lubricant, which positively affects the tribological performance of contacting surfaces. The experimental part of the study includes the manufacturing of prototype piston rings from D16 aluminum alloy, their heat treatment, and the application of MAO coatings under various technological conditions. The influence of process parameters on the phase composition and properties of the coatings is investigated. It is demonstrated that increasing the treatment duration leads to a higher content of the α-Al₂O₃ phase, resulting in an increase in hardness up to 24 GPa. A комплекс of laboratory tests was carried out, including the evaluation of elasticity, specific pressure, and relaxation resistance of the rings at elevated temperatures. The results show that the application of MAO coatings significantly increases ring stiffness, stabilizes their elastic properties, and ensures compliance with the requirements for conventional designs. It is also established that coated rings exhibit higher thermal stability and lower relaxation compared to untreated samples. Engine bench tests confirmed the effectiveness of the proposed approach: an increase in compression in the cylinders, stability of operational characteristics during operation, and reduced wear were observed. It is demonstrated that aluminum piston rings with MAO coatings outperform traditional counterparts in terms of antifriction, anticorrosion, and heat-resistant properties. In general, the results confirm the scientific validity and technological перспективність of using micro-arc oxidation to enhance the performance of piston rings. The proposed technology can be effectively implemented in mass production, providing improved operational characteristics of internal combustion engines and reducing their environmental impact

Cited by 0 works.

Authors