電磁雑音源としての衝突電極による静電気放電に関する実験的研究

一 冨田 · Institutional Repositories DataBase (IRDB)

Recently, there has been increased usage of electronic equipment with integrated circuits (ICs), which are used in high-speed and high-end semiconductor devices.Meanwhile, CPU clock frequencies have reached the order of several GHz, while signal voltages have decreased to 1 V.As the performance and functionality of electronic equipment have significantly improved, there have been several problems regarding malfunctions of electronic equipment due to electromagnetic noise.With respect to electromagnetic noise, natural sources mainly include lightning, which is a natural phenomenon, and man-made sources include high-frequency welding, high-frequency sewing machines, electric discharge machines, lighting equipment such as fluorescent lights, electro-mechanical devices and digital-switching devices.When high-frequency energy is either emitted or propagated from equipment through its power cables, electromagnetic environment deteriorates.During the development of ICs, electrostatic discharges (ESDs), which are among the main sources of electromagnetic noise, have rise times and frequency ranges of the order of sub-nanoseconds and above 6 GHz, respectively.Thus, discharge currents and electromagnetic waves due to ESD may interfere with clock pulses of electronic equipment and induce unexpected malfunctions.In particular, such failures are well-known to be frequently caused by ESDs due to the collision of charged objects, while the mechanism remains unknown.In this study, we performed experiments to clarify the characteristic mechanism of the ESD phenomenon when a charged electrode collides with a grounded electrode.We fabricated an experimental apparatus by which a charged / grounded electrode makes a linear uniform motion.Spark lengths, discharge currents, and induced voltages were measured with the experimental apparatus.To determine the main cause for ESD due to the collisions of discharge electrodes, which generate an electric field between electrodes, we performed experiments with ESD when an increasing voltage was applied to fixed electrodes.We used an AC servo-motor to make the collision speed constant, and performed the ESD experiment.The results show that as the collision speed increases, the average spark lengths decrease, the average values of the discharge current peak increase, the average rise times of the discharge current decrease, the average peak values of the induced voltage increase, and the average rise times of the induced voltage decrease.The collision speeds are also correlated with the spark lengths.With respect to the discharge current, the discharge peaks can be explained in a qualitative manner from an equation that was derived from the spark resistance formula proposed by Rompe and Weizel.The time delay of the breakdown becomes shorter as the collision speed increases.We investigated the ESD as the size of the electrode was varied.The results show that as the size of discharge electrodes becomes smaller for the same collision speed, the average spark lengths decrease, the average values of the peak discharge current increase, the average rise times of the discharge current decrease, and the average values of the peak induced voltage increase.To verify the reliability of the measured discharge currents through a commercially available current detection target which has a frequency flat response up to 4 GHz, we calculated the discharge currents based on the induced voltages in a magnetic loop probe with a diameter of 10 mm.We confirmed that the calculated results agree with the measured discharge currents for a spark length that is greater than approximately 0.5 mm, but they rise faster than the measured discharge currents when the spark length is approximately 0.2 mm, which may be due to the frequency limitation of the target.In the next experiment, a grounded spherical electrode was made to collide with a fixed charged spherical electrode.The results show that as the collision speed increases, the average spark lengths decrease, the average peak values of the induced voltage increase, and the average rise times decrease.The spectrum intensities that were obtained by applying a short-time Fourier transform to typical induced voltage waveforms for each collision speed strengthened as the collision speed increased.As the electric field between charged and grounded objects increases with time during their collision, the electric field between fixed electrodes, which has a gap length of 0.66 mm or 1.16 mm, was changed by increasing the rise velocity of a charging voltage for the fixed electrodes.The results show that as the rise velocity of the charging voltage increases, the discharge voltages and the peak discharge currents increase.Thus, the ESD phenomenon caused by the collision of the electrodes may be attributed to the rise velocity of the electric field between the electrodes.To confirm the above speculation, we measured the effect of the rise velocity of the charging voltage for fixed electrodes that have gap lengths of less than 0.1 mm on discharge voltages and discharge currents.The results show that as the rise velocity of the charging voltage increases, the average discharge voltages and the average values of the peak discharge current increase.In follow-up studies, it will be valuable to clarify the effect of collision speed on spark length theoretically, measure the discharge current using a wideband oscilloscope, and examine the effect of uniformity and condition of a spherical electrode, the dusts between electrodes, and humidity on ESDs.電磁雑音源としての衝突電極による静電気放電に関する実験的研究

Cited by 0 works. doi:10.20602/00003215 Open-access PDF

Authors