Пристрій моніторингу стану води
Б. П. Книш, Ярослав Анатолійович Кулик · Repository of Vinnytsia National Technical University (Vinnytsia National Technical University) · 2025
Water condition monitoring device contains a radiation source, an input optical system, a measuring cuvette, a radiation receiver, a microprocessor device, a meter, an outlet pipe, a valve, temperature sensors whose outputs are connected to the input of the microprocessor device, located at different levels of the measuring cuvette, a pressure sensor located on the measuring cuvette, whose output is connected to the input of the microprocessor device. The measuring cuvette has vertical and inclined walls, the input optical system consists of lenses and an aperture located on the same axis and forming a light strip. The device also contains a comparison unit, the output of which is connected to the input of a microprocessor device; a reference photodetector, the output of which is connected to a radiation receiver amplifier, the output of which is connected to a radiation source; a heating element located on the bottom surface of the measuring cuvette, which is filled with dirty water. The output of the heating element is connected to the heating element amplifier, which is connected to the input of the microprocessor device. The output of the piston as part of the measuring cuvette with a rod is connected to the input of the microprocessor device. The outputs of the upper and lower photodetectors as part of the radiation receiver are connected to the amplifiers of the radiation receiver, the outputs of which are connected to the comparison unit. The device also contains a data transmission unit connected via a bus to a microprocessor device.
Cited by 0 works. Open-access PDF