Совершенствование катушечных высевающих аппаратов для посева сои

I.М. Prisyazhnaya, Serafima P. Prisyazhnaya, Присяжная Ирина Михайловна et al. · Vestnik of the Russian agricultural science · 2026

It was determined that 46% of the park of sowing machines are occupied by NW seeders with rolling seedlings that carry out pulsating flows and do not provide an even distribution of seeds along the length of the row, which leads to a decrease in the soybean harvest. The parameters of the screw coil seeding apparatus of the seeder have been developed, which allows soy seeds to be more evenly fed and placed along the length of the row, providing plants with an optimal food area and better lighting. Analytical dependencies were obtained to describe the uniform distribution of seeds along the row, which made it possible to substantiate the design of the screw seeding apparatus, the optimal angles of the grooves relative to the axis of rotation of the coil 26.5-30.0 °, with a rib thickness of 1.5х0.5 mm, with the equality of length dimensions, coil diameter, number of grooves, sowing rate, depth dimensions of the groove with the base coil, as well as the rational shape of the prop pant valve, the line of the end surface of which is parallel to the axis of rotation of the coil. and the average distance between the seeds is determined depending on the sowing rate of 600-800 similarities thousand similar grains, respectively 11.1х8.3 cm with an average of 15х15 cm, 3.7 and 2.77 cm with a wide variety of 45х45 cm soybean sowing methods that meet agrotechnical requirements. It was found that when sown with experimental seeding devices compared with the basic ones due to a more uniform distribution of soybean seeds along the length of the row, 9.6% more plants remained by the time of harvesting, 7.2% higher than the average height of plants, 13.6% more than the mass of 1000 grains and 15.3% higher than the % of soybean harvest.

Cited by 0 works. doi:10.7868/s3034519726020178

Authors