HTS Dipole Insert Developments
J.M. Rey, M. Devaux, F. Bertinelli et al. · IEEE Transactions on Applied Superconductivity · 2013
Future accelerator magnets will need to reach a magnetic field in the 20 T range. Reaching such a magnetic field is a challenge only reachable using high temperature superconductor (HTS) material. The high current densities and stress levels needed to satisfy the design criterion of such magnets make YBaCuO superconductor the most appropriate candidate especially when produced using the IBAD route. The HFM EUCARD program is aimed at designing and manufacturing a dipole insert made of HTS material generating 6 T inside a Nb3Sn dipole of 13 T at 4.2 K. In the HTS insert, engineering current densities higher than 250 MA/m2under 19 T are required to reach the performances. The stress level is consequently very high. The insert protection is also a critical issue as HTS shows low quench propagation velocity. The coupling with the Nb3Sn dipole makes the problem even more difficult. The magnetic and mechanical designs of the HTS insert will be presented as well as the technological developments underway to realize this compact dipole insert.
Cited by 21 works. doi:10.1109/tasc.2013.2237931
Authors
- J.M. Rey
- M. Devaux
- F. Bertinelli
- X. Chaud
- F. Debray
- Maria Durante
- Philippe Fazilleau
- Thibault Lécrevisse
- C. Mayri
- C. Pes
- F. Pottier
- Massimo Sorbi
- Antti Stenvall
- Pascal Tixador
- Jean-Marc Tudela
- T. Tardy
- G. Volpini
References
- Superconducting magnets
- Materials at Low Temperatures
- Degradation of the performance of a YBCO-coated conductor double pancake coil due to epoxy impregnation
- Angular dependence of J c for YBCO coated conductors at low temperature and very high magnetic fields
- Development of the EuCARD $\hbox{Nb}_{3}\hbox{Sn}$ Dipole Magnet FRESCA2
- HTS Insert Magnet Design Study
- Quench Considerations and Protection Scheme of a High Field HTS Dipole Insert Coil
- Benchmark of Two Quench Codes for the Protection Study of an High Field HTS Insert Dipole
- Characterization of YBCO Coated Conductors Under High Magnetic Field at LNCMI