Electrothermal simulation of multichip-modules with novel transient thermal model and time-dependent boundary conditions
York Christian Gerstenmaier, Alberto Castellazzi, G. Wachutka · IEEE Transactions on Power Electronics · 2006
The ability of monitoring the chip temperatures of power semiconductor modules at all times under various realistic working conditions is the basis for investigating the limits of the maximum permissible load. A novel transient thermal model for the fast calculation of temperature fields and hot spot temperature evolution presented recently is extended to include time-dependent boundary conditions for variations of ambient temperature and surface heat flows. For this a Green's function representation of the temperature field is used. Also, general initial temperature conditions are included. The method is exemplified by application to a dc/ac converter module for automotive hybrid drives. The thermal model, which can be represented by a thermal equivalent circuit, then is combined with an electrical PSpice-metal-oxide semiconductor field-effect transistor (MOSFET) model to allow for the fully self-consistent electrothermal circuit simulation of 42-V/14-V dc/dc-converter modules. 670 converter periods with altogether 8000MOSFET switching cycles in the six-chip module can be simulated within 1-h computing time on a Pentium PC. Various simulation results are presented, which demonstrate the feasibility of the simulation method and allow for the optimization of converter losses. Short circuit modes of converter operation are investigated with a high temperature increase also revealing the thermal interaction between different chips.
Cited by 73 works. doi:10.1109/tpel.2005.861116
Authors
References
- Heat Conduction Using Green's Function
- Creation and evaluation of compact models for thermal characterisation using dedicated optimisation software
- The world of thermal characterization according to DELPHI-Part I: Background to DELPHI
- Generation and verification of boundary independent compact thermal models for active components according to the DELPHI/SEED methods
- A generic methodology for deriving compact dynamic thermal models, applied to the PSGA package
- Electrothermal CAD of power devices and circuits with fully physical time-dependent compact thermal modeling of complex nonlinear 3-d systems
- Studies on the Nonlinearity Effects in Dynamic Compact Model Generation of Packages
- Rigorous model and network for transient thermal problems
- Dynamic thermal multiport modeling of IC packages
- Static and dynamic thermal modeling of ICs