An Axial Gap-Type HTS Bulk Synchronous Motor Excited by Pulsed-Field Magnetization With Vortex-Type Armature Copper Windings
H. Matsuzaki, Y. Kimura, I Ohtani et al. · IEEE Transactions on Applied Superconductivity · 2005
We studied a high-temperature superconducting synchronous motor assembled with melt-textured Gd-Ba-Cu-O bulk field magnets. The motor is an axial gap-type, brushless synchronous motor with eight rotating bulk field magnet poles. Liquid nitrogen is circulated to cool down the rotor components. Pulsed field magnetization was performed to excite the bulk field magnets by using a pair of the vortex-type armature copper windings under the zero-field cooling. The trapped peak field density on the surface of the bulk was varied from 0.5 T to 0.8 T. The trapped peak magnetic field 0.5 T on the surface of the bulk magnets provided the motor performance of 3.1 kW with 720 rpm. The field density distribution on the pole bulk magnet surface is anisotropic and different from the ideal conical shape. The optimized pulsed current waveform applied to the armature and the employing of a composite of bulk crystal magnets leading to a spatially homogeneous flux trapping are promising methods for reinforcement of the field flux from the rotor and the motor torque.
Cited by 125 works. doi:10.1109/tasc.2005.849617
Authors
References
- High-temperature superconductor bulk magnets that can trap magnetic fields of over 17 tesla at 29 K
- High-Temperature Superconducting Motor Using Y-Ba-Cu-O Bulk Magnets
- An Axial Gap-Type HTS Bulk Synchronous Motor Excited by Pulsed-Field Magnetization With Vortex-Type Armature Copper Windings
- Development of Gd–Ba–Cu–O bulk magnets with very high trapped magnetic field
- Magnetization properties for Gd–Ba–Cu–O bulk superconductors with a couple of pulsed-field vortex-type coils
- Developments of superconducting motor with YBCO bulk magnets
- Fundamental study of a generator using bulk superconductors in the rotor